TRACTOR RADIO HARNESS
866.424.0575
FARM RADIO SUPPLY has a radio harnesses that plugs into your tractors' radio harness.  Most of our harness are designed to work with the REI line of radios.  Some of the more popular brands we also offer a harness designed for those that already have a radio.  Included with the REI harness is a diagram that shows what each wire is used for so you can cut off the REI side connector plug and wire it to your aftermarket radio with ease.
511834
$30.00
511834
511978
511978
$55.00
511845
511835
$30.00
511644
511644
$30.00
AGCO
CASE/IH Radio Harness
If your CASE/IH application looks like this one which was commonly found on the Combines, FARM All, and newer MX series of CASE/IH Tractors
TRACTOR ISO INV  $25.00
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
HAVE YOUR OWN RADIO
511505
511505
$38.00
511365
511365
$30.00
512231
512231
$30.00
HAVE YOUR OWN RADIO
CASE/IH Radio Harness
Most of your JCB applications should look like this.  If so and you have your own radio this harness will work on any radio.
TRACTOR ISO INV  $25.00
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
JDISO
JDISO  $25.00
HAVE YOUR OWN RADIO
510817
$30.00
510817
If the tractor side matches the pic then this is the harness you need.
NOTE: On the 2010 and up JD tractors the factory harness does not contain the ground wire for the radio.  John Deere furnished a seperate ground wire bundled with the antenna lead.  Attach this factory ground wire to the BLACK wire on our harness. This was a way of JD for fixing ground noise created on the tractor.  The factory black ground wire usually had a round lung ring fitting on it.
Our harness adapter has the color code on it.
510818
510818
$30.00
510728
510728
$30.00
510559
$30.00
510559
511255
511255
$30.00
KIOTI 16 PIN  $28.00
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
RADIO HARNESS
KUBOTA 9 PIN  $19.99
The Kubota 9 Pin harness includes crimp caps and a wire tie to insure your install is secure.
If your tractor has this 9 Pin Harness
KUBOTA RADIO HARNESS
KUBOTA
Kubota has made it easy with the use of the 9 Pin harness used in most of their tractors, ATVs and RTVs.  FRS prewires its radios with this harness if requested thru the text box under each radio.  Older and some M series tractors used a 9 pin as well but rectangle not square like the 9 Pin. 

FRS also sells the popular 9 Pin Kubota harness for those who already have their own radio.  Wire this to your new radios pigtail and you have a PLUG & PLAY application
511644
511644
$30.00
511655
511655
$30.00
511255
$30.00
511255
512767
512767
$38.00
MACDON has made it easy to install a new radio in its equipment.  All new models are using the MACDON ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
MACDON ISO
MACDON ISO
$25.00
McCormick has made it easy to install a new radio in its equipment.  All new models are using the TRACTOR ISO INV ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
TRACTOR ISO INV
TRACTOR ISO INV
$25.00
The harnesses represents the new models of McCORMICK Tractor.  If not sure it applies to your application, remove the radio and examine the connector.  Should consists of either a single plug divided into 2 sections that can contain 8 pins each or 2 separate 8 pin connectors that look similar.  Refer to pic of black connector.
512231
512231
$30.00
512767
512767
$37.00
511655
511655
$30.00
           If the tractor side matches the pic then this is the harness you need.

Most of the newer New Holland tractors use the ISO style connector for their radios.  If the pic here matches the one on your tractor this is the one you need.  This makes a cheaper choice if you are installing your own radio because it does not have the D6 plug on the other end.
Our harness adapter has the color code on it.
TRACTOR ISO INV  $25.00
NEW HOLLAND RADIO HARNESS
Another common harness is the 511655.  Here you can purchase it without the D6 plug on the other end and save a lot
NEW HOLLAND RADIO HARNESS
NEW HOLLAND RADIO HARNESS
NEW HOLLAND 9 PIN  $19.99
511834
511834... VIO80-1, SV100-2
$30.00
FRS 512472
FRS 512472.. VIO80, SV100-1
$30.00
FRS 512472
Currently working on more harnesses for YANMAR.  Check back to see more product.
KIOTI 16 PIN  $28.00
KIOTI 16 PIN
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
Back
Next
511834
$30.00
AGCO RADIO HARNESS
AGCO RADIO HARNESS
511978
$55.00
AGCO RADIO HARNESS
511835
$30.00
AGCO RADIO HARNESS
511644
$30.00
AGCO
CASE/IH Radio Harness
If your CASE/IH application looks like this one which was commonly found on the Combines, FARM All, and newer MX series of CASE/IH Tractors
TRACTOR ISO INV  $25.00
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
HAVE YOUR OWN RADIO
CASE IH HARNESS
511505
$38.00
CASE IH HARNESS
511365
$30.00
CASE IH HARNESS
512231
$30.00
HAVE YOUR OWN RADIO
JCB Radio Harness
Most of your JCB applications should look like this.  If so and you have your own radio this harness will work on any radio.
TRACTOR ISO INV  $25.00
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
JOHN DEERE RADIO HARNESS
JDISO  $25.00
HAVE YOUR OWN RADIO
510817
$30.00
JOHN DEERE RADIO HARNESS
If the tractor side matches the pic then this is the harness you need.
NOTE: On the 2010 and up JD tractors the factory harness does not contain the ground wire for the radio.  John Deere furnished a seperate ground wire bundled with the antenna lead.  Attach this factory ground wire to the BLACK wire on our harness. This was a way of JD for fixing ground noise created on the tractor.  The factory black ground wire usually had a round lung ring fitting on it.
Our harness adapter has the color code on it.
JOHN DEERE RADIO HARNESS
510818
$30.00
JOHN DEERE RADIO HARNESS
510728
$30.00
510559
$30.00
JOHN DEERE RADIO HARNESS
511255
$30.00
JOHN DEERE RADIO HARNESS
KIOTI 16 PIN  $28.00
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
KIOTI RADIO HARNESS
KUBOTA 9 PIN  $19.99
The Kubota 9 Pin harness includes crimp caps and a wire tie to insure your install is secure.
If your tractor has this 9 Pin Harness
KUBOTA RADIO HARNESS
KUBOTA RADIO HARNESS
Kubota has made it easy with the use of the 9 Pin harness used in most of their tractors, ATVs and RTVs.  FRS prewires its radios with this harness if requested thru the text box under each radio.  Older and some M series tractors used a 9 pin as well but rectangle not square like the 9 Pin. 

FRS also sells the popular 9 Pin Kubota harness for those who already have their own radio.  Wire this to your new radios pigtail and you have a PLUG & PLAY application
KUBOTA
511644
$30.00
KUBOTA
511655
$30.00
511255
$30.00
KUBOTA
LS TRACTOR RADIO HARNESS
512767
$38.00
MACDON has made it easy to install a new radio in its equipment.  All new models are using the MACDON ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
MACDON RADIO HARNESS
MACDON ISO
$25.00
McCormick has made it easy to install a new radio in its equipment.  All new models are using the TRACTOR ISO INV ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
TRACTOR ISO INV
TRACTOR ISO INV
$25.00
The harnesses represents the new models of McCORMICK Tractor.  If not sure it applies to your application, remove the radio and examine the connector.  Should consists of either a single plug divided into 2 sections that can contain 8 pins each or 2 separate 8 pin connectors that look similar.  Refer to pic of black connector.
NEW HOLLAND
512231
$30.00
NEW HOLLAND
512767
$37.00
NEW HOLLAND
511655
$30.00
           If the tractor side matches the pic then this is the harness you need.

Most of the newer New Holland tractors use the ISO style connector for their radios.  If the pic here matches the one on your tractor this is the one you need.  This makes a cheaper choice if you are installing your own radio because it does not have the D6 plug on the other end.
Our harness adapter has the color code on it.
TRACTOR ISO INV  $25.00
NEW HOLLAND Radio Harness
Another common harness is the 511655.  Here you can purchase it without the D6 plug on the other end and save a lot
If your tractor has this 9 Pin Harness
NEW HOLLAND 9 PIN  $19.99
YANMAR
511834... VIO80-1, SV100-2
$30.00
FRS 512472.. VIO80, SV100-1
$30.00
YANMAR
FRS 512472
Currently working on more harnesses for YANMAR.  Check back to see more product.
KIOTI 16 PIN  $28.00
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
KIOTI
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
Back
Next
511834
$30.00
RADIO HARNESS
511978
$55.00
RADIO HARNESS
511835
$30.00
RADIO HARNESS
511644
$30.00
AGCO
RADIO HARNESS
CASE/IH Radio Harness
If your CASE/IH application looks like this one which was commonly found on the Combines, FARM All, and newer MX series of CASE/IH Tractors
TRACTOR ISO INV  $25.00
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
HAVE YOUR OWN RADIO
RADIO HARNESS
511505
$38.00
511365
$30.00
RADIO HARNESS
512231
$30.00
RADIO HARNESS
HAVE YOUR OWN RADIO
JCB Radio Harness
Most of your JCB applications should look like this.  If so and you have your own radio this harness will work on any radio.
For those installing your own radio we offer a easy pigtail that can be wired to your own radios pigtail and then plug into the tractors radio harness.  No worry trying to ID the colors or wires.  Just wire our TRACTOR ISO INV (comes with matching colors for your radio as well as color IDs for each wire) and you are done.  EASY PEESY!  Purchase harness below
TRACTOR ISO INV  $25.00
RADIO HARNESS
JDISO  $25.00
HAVE YOUR OWN RADIO
510817
$30.00
If the tractor side matches the pic then this is the harness you need.
NOTE: On the 2010 and up JD tractors the factory harness does not contain the ground wire for the radio.  John Deere furnished a seperate ground wire bundled with the antenna lead.  Attach this factory ground wire to the BLACK wire on our harness. This was a way of JD for fixing ground noise created on the tractor.  The factory black ground wire usually had a round lung ring fitting on it.
Our harness adapter has the color code on it.
RADIO HARNESS
RADIO HARNESS
510818
$30.00
RADIO HARNESS
510728
$30.00
510559
$30.00
RADIO HARNESS
RADIO HARNESS
511255
$30.00
KIOTI 16 PIN  $28.00
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
RADIO HARNESS
KUBOTA 9 PIN  $19.99
The Kubota 9 Pin harness includes crimp caps and a wire tie to insure your install is secure.
If your tractor has this 9 Pin Harness
RADIO HARNESS
RADIO HARNESS
Kubota has made it easy with the use of the 9 Pin harness used in most of their tractors, ATVs and RTVs.  FRS prewires its radios with this harness if requested thru the text box under each radio.  Older and some M series tractors used a 9 pin as well but rectangle not square like the 9 Pin. 

FRS also sells the popular 9 Pin Kubota harness for those who already have their own radio.  Wire this to your new radios pigtail and you have a PLUG & PLAY application
RADIO HARNESS
511644
$30.00
511655
$30.00
511255
$30.00
RADIO HARNESS
RADIO HARNESS
RADIO HARNESS
512767    $38.00
MACDON has made it easy to install a new radio in its equipment.  All new models are using the MACDON ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
RADIO HARNESS
MACDON ISO   $25.00
McCormick has made it easy to install a new radio in its equipment.  All new models are using the TRACTOR ISO INV ISO harness.  This means all our HEAVY DUTY RADIOS will direct plug into the tractors' harness.  No extra pigtail harness needed.  If you are using your own radio this will wire to your radios pigtail for a true PLUG & PLAY radio.
TRACTOR ISO INV
$25.00
TRACTOR ISO INV
The harnesses represents the new models of McCORMICK Tractor.  If not sure it applies to your application, remove the radio and examine the connector.  Should consists of either a single plug divided into 2 sections that can contain 8 pins each or 2 separate 8 pin connectors that look similar.  Refer to pic of black connector.
RADIO HARNESS
512231
$30.00
RADIO HARNESS
512767
$37.00
511655
$30.00
RADIO HARNESS
TRACTOR ISO INV  $25.00
RADIO HARNESS
If your tractor has this 9 Pin Harness
RADIO HARNESS
NEW HOLLAND 9 PIN  $19.99
Another common harness is the 511655.  Here you can purchase it without the D6 plug on the other end and save a lot
If the tractor side matches the pic then this is the harness you need.

Most of the newer New Holland tractors use the ISO style connector for their radios.  If the pic here matches the one on your tractor this is the one you need.  This makes a cheaper choice if you are installing your own radio because it does not have the D6 plug on the other end.
Our harness adapter has the color code on it.
RADIO HARNESS
511834... VIO80-1, SV100-2
$30.00
FRS 512472.. VIO80, SV100-1
$30.00
RADIO HARNESS
FRS 512472
Currently working on more harnesses for YANMAR.  Check back to see more product.
RADIO HARNESS
If you are buying your own tractor radio from someone else Farm Radio Supply has the wiring harness for it.  Purchase the 16 Pin Kioti radio harness and wire it to the pigtail of the new radio you just bought.  Once this is done you will have a PLUG & PLAY for your radio.  If wiring a harness plug is not your calling, check out the prewired models we sell that will give you a PLUG & PLAY KIOTI RADIO
KIOTI 16 PIN  $28.00
Back
Next
When it comes to knowing which harness would fit your tractor the best way is to pull out the radio and compare it to the ones listed for your brand.  If you are cannot do this take a pic and text it to 336 528 9198 along with as much info about make model year.  If that is still not a good way for you just call us a 866.424.0575 and ask for tech support.  We have several sources to help you ID which one is right
[CONTACT][ABOUT US][PAYMENT][RETURNS][REI CATALOG]
FARM RADIO SUPPLY has a sister site that sells more radio harnesses for semi trucks and big rigs.  Visit at BIGRIGSTEREO.com
Menu